MIFARE Classic 1K (S50) Cards with HiCo Magnetic Stripe

125kHz vs 13.56MHz (MIFARE): Which Access Card Do You Need?

Ordering replacement access cards or fobs starts with one question: does your system run at 125kHz or 13.56MHz? Get it wrong and the cards simply will not read. This guide explains the difference and how to check what you have.

The short answer

  • 125kHz (low frequency) cards such as EM4100 send a fixed ID number. They are simple, cheap and very common in basic door entry and time and attendance.
  • 13.56MHz (high frequency) cards such as MIFARE Classic and DESFire store data, can be encrypted and are readable by NFC phones. They suit modern access control, cashless and multi-application cards.

A reader only understands its own frequency, unless it is a dual-frequency reader.

125kHz proximity cards

125kHz “prox” cards were the standard for decades. Each has a unique number programmed at the factory; the reader passes that number to the controller, which decides whether to open the door. There is no encryption, so the number can be read by anyone with a suitable reader. For low-risk doors that is often acceptable, which is why EM4100 proximity cards remain popular.

13.56MHz MIFARE and DESFire cards

13.56MHz smart cards have memory and security features. MIFARE Classic 1K is widely used but is an older design with known security weaknesses. DESFire uses AES encryption and is the better choice for new, higher-security systems. Because 13.56MHz is the same frequency as NFC, many of these cards can also be read by phones.

How to tell which one you have

  1. Check the reader or controller model. The manual or the installer’s documentation will state the technology.
  2. Look at the card. Printed text such as “EM”, “125kHz”, “MIFARE”, “1K” or “13.56MHz” is a strong clue. Thick, white clamshell cards are almost always 125kHz.
  3. Try a phone. If an NFC app on your phone detects the card, it is 13.56MHz. If nothing happens, it is likely 125kHz (or a branded format).
  4. Ask us. Send photos to our free card identification service and we will tell you.

What about HID, Paxton and other branded systems?

Many branded systems only accept the manufacturer’s own credentials or cards programmed with your site’s keys, so generic cards will not work even at the right frequency. We can quote for genuine branded credentials.

Upgrading? Consider dual-frequency

If you are moving from 125kHz to 13.56MHz, dual-frequency cards carry both chips so staff can use one card on old and new readers during the changeover.

Summary

Use 125kHz for simple, low-cost door entry where the system already uses it. Choose 13.56MHz, ideally DESFire, for new installations, higher security or multi-purpose cards. Browse our access control range or read more in our FAQs.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *